|
Welcome Pontiac Performance
Enthusiasts!
We have partnered
with the best parts suppliers in the Pontiac community to provide you with the
most mileage for your performance dollar! We are here to help your Pontiac
make POWER!
Whether your setup is all stock,
street/strip or all out race, we are here to help you meet your performance
goals. We carry a wide assortment of Pontiac performance parts.
We also
build Pontiac Performance engines too! Unlike some "Pontiac
Engine Builders" we build our OWN engines for our own race cars.
We also build our OWN Pontiac engines with the same parts we sell and manufacture!!
|
Want to build a KILLER
pump gas friendly street / strip engine? |
|
|
|
We have some of the
highest horsepower KRE D port combo's out there. From 475 HP to 680
HP and everything in between. We have been using and testing the KRE
D ports since they have become available. Next to KRE, we have more
proven KRE D port combos out there than any other Pontiac engine builder! |
|
Pump
GAS Pontiac Street Engine Packages
or check out our
RACE
engine packages |
Check us out in the May 2008 issue of High
Performance Pontiac teaming up with KRE to build an 850 horsepower 505 MR-1 /
KRE High Port combo
Get ready for the next
season with
a new MR-1 block and one of our
complete rotating assemblies /
stroker kits!
MR-1A Aluminum Pontiac
Blocks, MR-1 PRO, and MR-1A PRO Aluminum blocks are now available [more
info here]
We have blocks and
forged cranks!!!
| $2,995.00 |
| ** Accepts all stock
Pontiac Parts ** |
| For Street or Race use |
Rubber Steel Core
Pontiac Valve Cover Gaskets .3125 thick
These
Pontiac steel core rubber neoprene valve cover gaskets are the best on the
market. They measure .3125” thick (5/16). The steel core
maintains the shape of the gasket for improved sealing. These gaskets are
great for high vacuum / vac pump applications as well as general street use.
Gaskets will NOT get sucked into the valve train area and or split /crack like
cork. These gaskets can also help out with clearance issues with roller
valve trains. No sealer required!
It's a well-know fact that older engines especially flat
tappet performance engines, require an oil additive know as ZDDP ( Zinc
Dialkyl-Dithio-Phosphate ). This additive has been the most effective
extreme pressure additive found in quality motor oils for almost 70 years.
| ZDDP-7176 |
| 4 oz bottle of ZDDPlus (treats 5 quarts
of oil) |
| $9.95 |
|
Teflon Water Crossover
Gaskets
These teflon water cross over gaskets are great for those
who are frequently removing / swapping intake manifolds. Really good for
dyno rooms too! As with all of our Teflon products, the gaskets are
re-usable. They are available in .062 paper as well.
| TIP - WXO |
TIP-WXO-T |
| Water Neck Crossover
Gasket .062 paper |
Teflon Water Neck
Crossover Gasket |
| $2.50 |
$5.00 |
|
|
This Oldsmobile fuel pump blockoff is CNC machined
out of 6061T-6 Aluminum and a perfect match for any Oldsmobile engine that will
be using an electric fuel pump. The kit comes with everything you see:
the block off plate, re-usable Teflon gasket, and 2 stainless steel bolts cap
screws. Bolt holes are recessed for an ultra clean / flat
appearance.
| Oldsmobile fuel pump blockoff kit with Teflon gasket |
| OLDS-BLK-001 |
| $26.95 |
|
Pontiac Camshaft Installation Tool
This cam install tool is
made from aluminum and will help prevent damaging your cam bearings while
installing your new camshaft.
Heavy Duty Pontiac Oil Pump Drive Shaft
We now carry Tripower throttle shafts for end carbs as well
as the various center carbs. Check out our Tripower
Parts page
|
Above is a picture of the NEW
KRE 340 DT gasket on a 290
CFM KRE D port aluminum head. Notice how the gasket follows the
contour of the head. You will see no unsightly gasket material
sticking out from the heads once your manifolds or headers are bolted
up. These gaskets also work well with all Pontiac cast iron heads
as well. These gaskets are available .062 and .125 thick |
|
TIP-KRE340DT |
|
$28.00 pr |
|
.125 thick |
|
|
|
|
We are also currently
making the popular 1424 sized gasket out of the same .125
material. These gaskets are also available in .062 material as
well. |
|
TIP-1424T |
|
$28.00 pr |
|
.125 thick |
|
|
|
More
Pontiac Exhaust Gaskets |
|
Oldsmobile Fuel Pump
Blockoff Gasket
These gaskets
are made from high quality Interface material and are .062 thick.
Teflon Oldsmobile Fuel Pump
Blockoff Gasket
These gaskets
are made from high quality teflon and are re-usable! They are .075 thick.
We
are also currently making Oldsmobile crank mandrel drive systems too! More
info here...
 |
| DIY
Quadrajet Carburetor Throttle Shaft Bushing Kit |
| TIP-BK-002 |
|
$62.50 |
|
|
|
New Tin Indian
Performance Gaskets and Seals |
|
3 and 3 1/4 Viton ® Pontiac Rear Main seals |
|
|
 |
| 3.00 inch main Viton
® Pontiac Rear Main Seal |
3.25 inch main Viton
® Pontiac Rear Main Seal |
| TIP-RM300 |
TIP-RM325 |
| $29.95 |
$29.95 |
|
|
These Pontiac rear main seals have been in development for over a year before
being released to the public and have been used in a variety of engines from
street to all out race. Most recently we pulled 21" of vac on our 540
cid 950 HP digger engine combo!
We are ALWAYS working on a new on-line
catalog / parts listing. Check back for new products and
updates! If you don't see something your looking for, shoot us a mail or
give us a call!
In an effort to not clutter up the
main page, please check out our New
Pontiac Performance Parts page. This is where you will find
most of our new / recent offerings.
Forged Pontiac
Cranks & Cast Pontiac Cranks
IN STOCK!
KRE Cylinder heads are the
most efficient Pontiac cylinder heads on the market!
They are also the
most versatile Pontiac heads available. No other heads cover the street
and bracket racing market like the KRE heads. By far the best bang for the
buck!
KRE
Aluminum High Port Heads & KRE
Aluminum D-Port Heads
64 cc and 80 cc High Port chambers are Now
available!
| Get free
(up to $50) on any KRE Aluminum head! |
| Shipping offer available in the continental United States
only and limited to $50.00 USD. |
To place an order call us at 330-699-1358 or send us an email @ kevin.swaney@tinindianperformance.com.
Please include you name, address, and telephone number. Payment is handled
right before shipping. 50% deposit required on custom orders.
High
Port Performance Updates.....
Check out Mike Williams' '1966 GTO Race Car
9.17 @ 144 mph
505 MR-1 with High Port
Heads
&
Kevin
Swaney's Pontiac Powered Rear Engine Dragster
| 7.37 @ 179 mph |
| Naturally
Aspirated Record Holder! |
540 MR-1 with High Port Heads
Ti
|
and we will get right back to you!
